Zoom

Chaud

Nouveau

En stock

Pré-commander

Hapstone R2 Aigueur de couteau standard

Name: Hapstone R2 Aigueur de couteau standard
Brand: Hapstone
SKU: HAPSTONE-R2-STANDARD-BAREBONE
Price: 275.0 USD
Availability: InStock
Rating: 4.6 (20 reviews)

in 📙Hapstone R2

#2 Best Seller in 📙Hapstone R2
#4 Best Seller in ⚔️Systèmes d'affûtage
#4 Best Seller in ⚔️Hapstone Aiguiseurs

En stock, Fabriqué en Ukraine, Fabriqué par Hapstone, ⚔️Hapstone Aiguiseurs, ⚔️Systèmes d'affûtage, 📙Hapstone R2, 🛒Catalogue complet

Brand

Hapstone

Sharpener Configuration

Original Kit

SKU: HAPSTONE-R2-STANDARD-BAREBONE

DISPONIBILITÉ: En stock (56 articles)

$275.00 USD

Attention! il reste 56 en stock

Il vous manque $50.00 USD pour une livraison gratuite

Free Shipping
on orders over $50

Returns in 14 Days
following delivery date

US Customer Support
(470) 227-7960

Paiement sécurisé:

Description

Hapstone Ajusteur du couteau R2 est le nouveau pointeur de couteau de Hapstone, fournisseur de réussite Hapstone R1. Hapstone R2 à égalité avec Hapstone V8 et Hapstone M3 fait partie du Hapstone Plateforme modulaire, technologie innovante pour permettre aux clients de configurer et de mettre à niveau le système de netteté sans limites. Hapstone R2 est équipé du module de serrage rotatif de pointe et offre la combinaison ultime de haute précision, de caractéristiques riches et d'évolutivité aux amateurs de netteté.

Hapstone Norme R2 est le kit principal dans le segment des prix de moins de 300 $. R2 Standard dispose de 2x pinces universelles angulaires asymétriques qui peuvent être tournées vers l'intérieur (pour les petits couteaux) ou vers l'extérieur (pour les couteaux longs). Les pinces utilisent des vis à ressort plat et d'espaceur flexibles pour fixer les couteaux de toute forme, y compris une mouture plate complète.

Hapstone Plate-forme modulaire

Hapstone La plate-forme modulaire et tous les modules peuvent être achetés séparément
La base avec le piédestal pour les modules
Pivot Unit avec la rotation complète à 360 ° et le crochet de stationnement pour la tige de guidage
Le porte-billes linéaire offre un mouvement de tige de guidage lisse et ne nécessite aucune lubrification ni nettoyage dans une utilisation robuste
Porte-pierre universel auto-réglable avec support de jauge d'angle numérique intégré
Convient pour aiguiser des pierres jusqu'à 6 pouces (160mm), y compris Edge Pro et les formats KME
Arbre horizontal en alliage léger pour un meilleur contrôle de pression pendant le processus de netteté
Poignée en bois pour faciliter un peu plus de travail un peu plus facile
Jois de support enrobée en caoutchouc qui peut être utilisée sur n'importe quelle surface
Option: module de pince rotatif (Hapstone R2)
Option: module de table extensible (Hapstone V8)
Option: petit module de table (Hapstone M3)
Option: module de ciseaux
Option: module de ciseau

Hapstone R2

⚙️ROTATION MODULE DE CRAMP avec la barre transversale pour plusieurs pinces
⚙Ègris
🔪Tout angle de netteté dans une plage de 8 ° à 35 ° degrés (*)
📏Longueur de la lame maximale 12 "(300mm), épaisseur maximale 1/4" (8mm)

* La plage d'angle de netteté varie entre les différentes pinces et les lames.

Hapstone Kits R2

Hapstone R2 est disponible en 4 kits préconfigurés: Lite, Standard, Opti, Black. Tous les kits incluent Hapstone Plate-forme modulaire et module de serrage rotatif.

léger

Ajusteur d'entrée de gamme pour les couteaux de cuisine
🔪2x pinces à lite courte

Opti

Nouveau kit grand public avec de nouvelles pinces faciles à utiliser
🔪Pinces Opti 2x

Standard

Kit traditionnel standard pour tous les couteaux
🔪2x pinces universelles inclinées

[NOIR]

Kit étendu avec 4 pinces et accessoires supplémentaires
🔪Pinces Opti 2x 🔪2x pinces universelles inclinées Adaptateur de réglage fin 🛑2x bouchons de printemps 📐Jauge d'angle numérique 🔩Tournevis hexagonal à bille (4mm) 🖊Çons tailleur de la taille de la taille de la taille 📈Graphique GLGC étanche

Paquets en pierre

Vous pouvez acheter le pointeur dans un paquet avec l'un de nos ensembles de pierres. Chacun des faisceaux de pierres recommandés comprend des pierres avec du grain uniformément incrémenté (taille des grains). Vous pouvez vérifier notre recommandation, en fonction de la dureté en acier de vos couteaux.

Si vous avez déjà une collection de pierres d'affûtage, ou si vous prévoyez d'acheter des pierres de votre choix, choisissez le Kit nubone sans pierres.

Paquets de plaque de diamant

Diamant de base

💎Gritomatic Diamond 240 💎Gritomatic diamant 600 💎Gritomatic diamant 1000
Les plaques de diamant de 20mm de large de 20mm sont montées sur un blanc en aluminium avec gravure laser. Pour tous les aciers.

Diamant optimal

💎TSProf Diamant 150 💎TSProf Diamond 220 💎TSProf Diamant 400 💎TSProf Diamant 600 💎TSProf Diamant 1000
Les plaques de diamant de 25mm de large sont montées sur un blanc en aluminium avec gravure laser. Pour tous les aciers.

Paquets en diamant collé en résine

Venev Ursa

(Ensemble de pierres Polaris) 💎Ursa Diamond 80 + 150 💎Ursa Diamond 240 + 400 💎Ursa Diamond 800 + 1200
Ensemble de diamants bon marché mais puissant pour tous les utilisateurs. Diamants étroits à double face en résine 6 "en résine. Six grains 80 à F1200. Pour tous les aciers. À utiliser avec de l'eau.

Venev Centaur

(Ensemble de pierres alpha centauri) 💎Centaur Diamond 100 + 240 💎Centaur Diamond 400 + 800 💎Centaur Diamond 1200 + 1500
Ensemble de diamants à milieu de gamme pour tous les utilisateurs. Diamants à double face en résine 6 "en résine. Six grains 100 à F1500. Pour tous les aciers. À utiliser avec de l'eau.

Bundles Waterstone

Carbure de silicium

🧱Boride CS-HD 120 🧱Gritomatic Carbure de silicium 240 🧱Gritomatic Carbure de silicium 600 🧱Gritomatic Carbure de silicium 1000 🧱Gritomatic Carbure de silicium 2500
Pierre en carbure de silicium pour aciers durs (plus de 58 HRC). Toutes les pierres sont pré-tournées, montées sur des blancs en aluminium et faciles à utiliser. À utiliser avec de l'eau.

Boride

🧱Boride T2 150 🧱Boride T2 220 🧱Boride T2 400 🧱Boride T2 800 🧱Boride T2 1200
Pierre d'oxyde d'aluminium en aluminium dur pour les utilisateurs expérimentés. Pour les aciers doux et moyens. Peut être utilisé avec de l'eau ou de l'huile.

Customer Reviews

mark S.

Love/Hate experience. First off for the money they have a long way to go , the fit and finish is good but tolerances and sturdiness has a lot to be desired. After fiddling around I can get a good edge. They are almost there

Elbert C.

Within three weeks the 16 screws, holding the clamps together, started falling out. After the 2nd time replacing them, the screw heads stripped. No longer able to tighten the screws meant the clamps worked loose, becoming unusable. Then the big Allen head screw seized. I used a mini-hacksaw and cut the bolt between the jaws of the clamp. I replaced both of the screws and square nuts. Using 1/4-20 screws and nuts. This size is a little larger than the original metric screws and nuts. They actually fit better than the originals. I also purchased 20 m3-0.5x 8mm allen head screws and lock washers. I replaced all of the 16 clamp screws with the new hardware. The screws use a larger allen wrench and are 3mm longer. So they can be tightened tighter. With the lockwashers holding the screws from coming loose. And the extra clamp force from the additional torque of the bigger allen heads, makes these clamps rigid. The lateral movement is all but eliminated. I was able to calibrate the clamps to 0.0degree change when flipping the R2 module. I am very disappointed in the original hardware choices. For less than $10 I was able to repair/re-engineer these clamps. It's just a shame I had to go through this with a pair of 3 week old $120 clamps with a 5 year warranty. I'm sure Hapstone could have improved the hardware for much less than I spent retail at a big box store. For this reason alone, I knocked off 2 stars. I only gave this 3 stars. With all this said, I do love this sharpener. I upgraded to the precision adjuster. Changing and maintaining angles has never been so easy. And now that clamps have no deflection my blades have made a significant improvement in sharpness. Gliding effortlessly through cardboard. All in all it is a great product. I highly recommend it. Just be prepared to have to replace some hardware...

Michael L.

It's a good starting platform for most of your sharpening needs. There are a fair number of addons to sharpen different items like scissors or chisels. I'm a little disappointed because the holder that the linear bearing passes through is loose and that allows a couple degrees of slop for the sharpening arm. I think at this price point things should be tighter for a more consistent edge.

Dave S.

it's truly a sturdy piece of equipment and it sharpens knives quickly. I love it. I would recommend to anyone looking for a mid priced fixed angle sharpener.

Lisa S.

Bought this for a Christmas present so I really can't tell you anything about it. We have friend who purchased a different one from you and we tried his out and my husband loved it. Hopefully he will be surprised at Christmas and will love it.

Christopher Murray

Solid,quality built sharpener. Gets the job done with minimal effort.

Philippe Labelle

I have been sharpening for many years, I’m an enthusiast woodworking and hunter! I love my Tormek T8 with original wheel, plus a diamond wheel upgrade and Japanese water Stone... I also have a Viel belt grinder with trizac and leather belt for stropping… Those two contraptions are absolut great tools, but it can be nerve racking to sharp expensive Japanese knives, Wustoff or complicated tips on hunting knives… I wasn't not comfortable putting these knives through that process! I also tried Japanese water stones and ended up with DMT diamond plates… A real learning curve I guess! I'm sorry, I know there are very talented people out there that can do magic with japanese stones, but with my hand, my condition with arthritis, my muscle memory… I am just not comfortable and I wasn't getting the right precise angle and it was very easy for me to roll the edge at the end of a sharpening session! So after weeks of shopping, lurking through Youtube, I decided to go with the Hampton R2 system with the Jende Atoma diamond plate. OMG! The Jende Atoma diamond plates are just fabulous. I did get the 140, 400, 600, and 1200 combo with the artificial stoop (and 4 micro spray). The results: just wow! Repeatable angle, confirmation with the angle finder, stropping, just a great process with splendid edge result! With the Hapstone R2 + Jende Atoma plate, I’m in a sharpening happy place! I also did get the scissor adapter, I used to sharpen my barber salon shear (expensive German Jaguar shear). Doing it for free and always being a bit nervous, free hand with diamond plate Xfine@ 47degres sharpening and working flat the burr… The Hapstone scissor jig with half inch Boride is great for simple bevel angles (convex bevel is another topic…). Yep, it is cutting wet tissue paper ! Bravo Gritomatic! You are offering absolut top gear! After digesting the custom UPS fees to Canada (took me an hour) I’m absolutely thrilled with my latest addition to my sharpening addiction! Why did I wait so long… Phil

Rich Mathews

Hapstone R2 knife sharpener I spent 9 hours sharpening knives and scissors the first weekend that I had the R2. I just couldn’t stop I was having so much fun. This is my first high quality knife sharpener and it exceeded all my expectations. With all the updates Hapstone has done to the R2, I’d say it’s the perfect knife and scissors sharpener.

Anonymous

Awesome!!! I am so glad I decided to pickup the R2. It came in perfect condition and rotating the clamp showed no change in angle! Pick yourself up two spring stops and the fine tuning adapter.

Bradley

Very nice product. Infinitely better than the worksharp.

Jeanne Touchton

Very nice unit.my only criticism is the hook that holds the arm up keeps falling out. It is only threaded for about an eighth of an inch.

Daniel Richards

This is great for the price! There are a couple of things I will be improving myself. But for $250, killer deal!

Anonymous

It works Gets the job done.

Rob Christian

I am writing this review for anyone looking to upgrade from the Lansky System. After 10 yrs. of using the Lansky I decided to try a more expensive system. There is little info out there about the more advanced systems and what you do find are ads or "reviews" from people who have received free equipment. If you are in my situation I hope this helps. I bought the Hapstone System without a bundle and purchased higher quality stones separately. So far I have sharpened a Pro Tech Runt J4 w/ a 2" blade, a Microtech Killswitch w/ a 3.25" Elmax blade(my work knife), a Fox tang folder w/ a N690 3" blade, two Swiss made steak knives and a cheap 8" chef knife. For the Elmax blade I used 6" stones at 20 degrees: -140 Atoma -600 Atoma -15 micron JENDE resin bonded -2k Chosera -3 micron JENDE resin bonded -20k Suehiro -.05 Jende Poly Diamond on cowhide strop It only took a few passes on each stone up to the 15 micron to get a burr. The Chosera took around 6 passes with additional work on the tip and curve. It was possible to get a burr with the 20k stone although this step took over an hour to accomplish. The diamond poly worked surprisingly well. It is so easy to use, I will never go back to the green and red block rouge. I used one clamp for the Pro Tech and two clamps for the other knives. Both setups worked well and the clamps held firm. There is some minor give but it did not effect the outcome of any knife. When sharpening the 8" blade the base kept tipping forward on me. You would need to attach the unit to a table or bench to sharpen any knife larger than an 8" chef. If you routinely sharpen knives this system is well worth the money. It is so much faster, and safer, to use over the Lansky. After several days of use the Hapstone feels sturdy enough to last. The sharpness this system is capable of is way beyond what I could ever do with the Lansky. I do have a few grips however. The Hapstone fine tuning adapter as well as the end stoppers are needed for this system to work efficiently. As it stands you get nickeled & dimed to the tune of $50 to get these items, which should come as standard equipment. The stones present another problem, no two are the same thickness. This results in you having to adjust the jig every time you change stones. Buying the same brand of stone does not alleviate the problem. As an example many of mine were made by JENDE. Even the resin bonded stones are of different thicknesses. Why should I be forced to adjust the jig between 15 and 3 micron stones? The difference is literally microscopic! As for Gritomatic, I ordered 15 items and got exactly what I ordered, in 4 days. I would recommend buying and angle finder and at least a 30x jewelers loupe if you decide on this system. I would also recommend grabbing some painter's tape. On the smaller knives the stones will scuff up the finish, just at the top of the handle, if left uncovered.

Anonymous

Hapstone R2 modular system. I’m having a 2 slight issues. 1. after knife is clamped in the jaws and I zero one the rotating module then check the angle on the stone holder I’m getting 1/2 degeee difference from one side of the knife to the other. Not sure how to zero the clamps. 2. If I zero the angle cube on the rotating module then Set my sharpening angle then check to see if the angle of the rotating module then check again on the blade I’m showing 2 1/2 degree difference. So if I zero on the rotating module then check for zero on the. Made im showing 2 1/2 degree difference for zeroing on the blade or rotating module. Any suggestions would be great. Thanks y’all and enjoy

WILLIAM SATTLER

Moved from a KME and really liking the Hapstone. Well built, heavy enough to stay in place, incredibly smooth with the bearing in the stone-holder rod. The clampng system is OK, but never seem to get them really tight on the cross arm, that system could be improved, but works well enough with two arms holding the knife in place. All in all very pleased and enjoying using it, no longer looking to upgrade, this is good enough for me for the forseeable future.

Anonymous

Nice Product

John Walters

Quality with versatility I have built a chisel adapter and a plane blade adapter. I can sharpen chisels and plane blades to the same high quality as a knife.

Nicholas Blumkin

Absolutely amazing! Beats my Wicked Edge, hands down.

Daniel Gamber

Solid piece of kit! My sharpening time has become more zen with the consistency of this sharpener.

About Hapstone Modular Platform

Hapstone Modular Platform

Hapstone Modular Platform and all modules can be purchased separately
The base with the pedestal stand for modules
Pivot unit with full 360° rotation and parking hook for the guide rod
Linear ball-bearing provides smooth guide rod movement and requires no lubrication or cleaning in heavy-duty usage
Auto-adjustable universal stone holder with built-in digital angle gauge holder
Suitable for sharpening stones up to 6 inches (160mm) including Edge Pro and KME formats
Light-alloy horizontal shaft for better pressure control during the sharpening process
Wooden handle to make time-consuming work a little easier
Rubber-coated supporting legs that can be used on any surface
Available now: Rotating Clamp Module (Hapstone R2)
Available now: Extendable Table Module (Hapstone V8)
Available now: Small Table Module (Hapstone M3)
Available now: Scissors Module

Hapstone R2

⚙️Rotating clamp module with the crossbar for multiple clamps
⚙️Adjustable flipping strength
🔪Any sharpening angle in a range from 8° to 35° degrees (*)
📏Max blade length 12" (300mm), max thickness 1/4" (8mm)

* The sharpening angle range varies between different clamps and blades.

Hapstone R2 Kits

Hapstone R2 is available in 4 pre-configured kits: Lite, Standard, Opti, BLACK. All the kits include Hapstone Modular Platform and Rotating Clamp Module.

Lite

Entry-level sharpener for kitchen knives
🔪2x Short Lite Clamps

Opti

New mainstream kit with new easy-to-use clamps
🔪2x Opti Clamps

Standard

Standard mainstream kit for all knives
🔪2x Angled Universal Clamps

BLACK

Extended kit with 4 clamps and extra accessories
🔪2x Opti Clamps 🔪2x Angled Universal Clamps Fine-Tuning Adapter 🛑2x Spring-Assisted Stoppers 📐Digital Angle Gauge 🔩Ball-End Hex Screwdriver (4mm) 🖊️King Size Sharpie Marker

Stone Bundles

Paquets en pierre

Les systèmes de netteté peuvent être achetés avec l'un de nos ensembles de pierres. Chacun des faisceaux de pierres recommandés comprend des pierres avec du grain uniformément incrémenté (taille des grains). Vous pouvez vérifier notre recommandation, en fonction de la dureté en acier de vos couteaux.

Ensembles de pierres standard

Plaques de diamant

Diamant de base

💎Gritomatic Diamond 240 💎Gritomatic Diamant 600 💎Gritomatic Diamant 1000
Les plaques de diamant de 20mm de large de 20mm sont montées sur un blanc en aluminium avec gravure laser. Pour tous les aciers.

Diamant optimal

💎TSProf Diamant 150 💎TSProf Diamond 220 💎TSProf Diamant 400 💎TSProf Diamant 600 💎TSProf Diamant 1000
Les plaques de diamant de 25mm de large sont montées sur un blanc en aluminium avec gravure laser. Pour tous les aciers.

Diamants liés à la résine

Venev Ursa

(Ensemble de pierres Polaris) 💎Ursa Diamond 80 + 150 💎Ursa Diamond 240 + 400 💎Ursa Diamond 800 + 1200
Ensemble de diamants bon marché mais puissant pour tous les utilisateurs. Diamants étroits à double face en résine 6 "en résine. Six grains 80 à F1200. Pour tous les aciers. À utiliser avec de l'eau.

Venev Centaur

(Ensemble de pierres alpha centauri) 💎Centaur Diamond 100 + 240 💎Centaur Diamond 400 + 800 💎Centaur Diamond 1200 + 1500
Ensemble de diamants à milieu de gamme pour tous les utilisateurs. Diamants à double face en résine 6 "en résine. Six grains 100 à F1500. Pour tous les aciers. À utiliser avec de l'eau.

Des éteignes de la charité

Carbure de silicium

🪨Gritomatic Carbure de silicium 120 🪨Gritomatic Carbure de silicium 240 🪨Gritomatic Carbure de silicium 600 🪨Gritomatic Carbure de silicium 1000 🪨Gritomatic Carbure de silicium 2500
Pierre en carbure de silicium pour aciers durs (plus de 58 HRC). Toutes les pierres sont pré-tournées, montées sur des blancs en aluminium et faciles à utiliser. À utiliser avec de l'eau.

Boride

🪨Boride T2 150 🪨Boride T2 220 🪨Boride T2 400 🪨Boride T2 800 🪨Boride T2 1200
Pierre d'oxyde d'aluminium en aluminium dur pour les utilisateurs expérimentés. Pour les aciers doux et moyens. Peut être utilisé avec de l'eau ou de l'huile.

Ensembles de pierres premium

Des éteignes de la charité

Chosera

🪨Gritomatic Carbure de silicium 120 🪨Chosera 400 🪨Chosera 1000 🪨Chosera 2000 🪨Chosera 5000 🪨Chosera 10000
Pierres d'oxyde d'aluminium 4x avec le liant de magnésie + carbure de silicium grossier (pas de chosera). Pour les utilisateurs avancés. Excellente qualité d'aiguisse et performances, résistance à l'usure élevée. Pour tous les aciers, y compris les aciers à haute teneur en carbone, en vanadium et en chrome.

Shapton Pro (Kuromaku)

🪨Shapton Pro 120 🪨Shapton Pro 320 🪨Shapton Pro 1000 🪨Shapton Pro 2000 🪨Shapton Pro 5000 🪨Shapton Pro 12000
Pierres d'oxyde d'aluminium avec le classeur de magnésie pour les utilisateurs avancés. Excellente qualité d'aiguisse et performances, résistance à l'usure élevée. Pour tous les aciers, y compris les aciers à haute teneur en carbone, en vanadium et en chrome.

Diamond et CBN liés à la résine

Matrice

💎Edge Pro Matrice 80 💎Edge Pro Matrice 250 💎Edge Pro Matrice 650 💎Edge Pro Matrice 1100 💎Edge Pro Matrice 2300 💎Edge Pro Matrice 4000
La matrice est un ensemble complet de diamants liés à la résine Edge Pro Matrice avec une tolérance de planéité serrée. Diamants matriciels à utiliser avec de l'eau.

Venev Orion

(Sirius Stone Set) 💎Venev Orion 80 💎Venev Orion 150 💎Venev Orion 240 💎Venev Orion OCB 400 💎Venev Orion OCB 800 💎Venev Orion OCB 1200
Ensemble de diamants lié à la résine premium. Tous les diamants sont montés sur des blancs en aluminium et faciles à utiliser. À utiliser avec de l'eau.

Venev Orion CBN

(Ensemble de pierres de Betelgeuse) 🧊Venev Orion³ 80 🧊Venev Orion³ 150 🧊Venev Orion³ 240 🧊Venev Orion³ 400 🧊Venev Orion³ 800 🧊Venev Orion³ 1200 🧊Venev Orion³ 2000
Ensemble CBN de résine haut de gamme. Toutes les pierres CBN sont montées sur des blancs en aluminium et faciles à utiliser. À utiliser avec de l'eau.

mark S.

Elbert C.

Michael L.

Dave S.

it's truly a sturdy piece of equipment and it sharpens knives quickly. I love it. I would recommend to anyone looking for a mid priced fixed angle sharpener.

Lisa S.

Christopher Murray

Solid,quality built sharpener. Gets the job done with minimal effort.

Philippe Labelle

Rich Mathews

Anonymous

Awesome!!! I am so glad I decided to pickup the R2. It came in perfect condition and rotating the clamp showed no change in angle! Pick yourself up two spring stops and the fine tuning adapter.

Bradley

Very nice product. Infinitely better than the worksharp.

Jeanne Touchton

Very nice unit.my only criticism is the hook that holds the arm up keeps falling out. It is only threaded for about an eighth of an inch.

Daniel Richards

This is great for the price! There are a couple of things I will be improving myself. But for $250, killer deal!

Anonymous

It works Gets the job done.

Rob Christian

Anonymous

WILLIAM SATTLER

Anonymous

Nice Product

John Walters

Quality with versatility I have built a chisel adapter and a plane blade adapter. I can sharpen chisels and plane blades to the same high quality as a knife.

Nicholas Blumkin

Absolutely amazing! Beats my Wicked Edge, hands down.

Daniel Gamber

Solid piece of kit! My sharpening time has become more zen with the consistency of this sharpener.

Questions and Answers